How can stone-like paint achieve an even spray? It's actually quite simple!

A spray gun is a device that uses liquid or compressed air to quickly release power. Most water-based colorful paints are applied using a spray gun.

18

2019

/

11

Warmly celebrate the 98th anniversary of the founding of the Communist Party of China!

Warmly celebrate the 98th anniversary of the founding of the Communist Party of China!

01

2019

/

07

Spring is a small peak season for renovations, but there are some things you need to pay attention to.

"In summer, there is a lot of harmful gas volatilization during renovations. In autumn and winter, the ventilation time is limited, and harmful gases like formaldehyde and benzene that continuously volatilize cannot be quickly expelled. In spring, the temperature and humidity are moderate, making it generally more suitable for home renovations."

12

2019

/

04

When it comes to the construction of tile back adhesive, there are several important considerations to keep in mind: 1. **Surface Preparation**: Ensure that the surface where the adhesive will be applied is clean, dry, and free of dust, grease, or any other contaminants that could affect adhesion. 2. **Adhesive Selection**: Choose the right type of adhesive based on the tile material and the environment (e.g., moisture levels, temperature). 3. **Mixing**: Follow the manufacturer's instructions for mixing the adhesive. Improper mixing can lead to poor adhesion and tile failure. 4. **Application**: Apply the adhesive evenly using the appropriate trowel size. Avoid applying too much adhesive at once to prevent it from drying out before tiles are placed. 5. **Tile Placement**: Press the tiles firmly into the adhesive and ensure they are aligned properly. Use spacers to maintain consistent grout lines. 6. **Curing Time**: Allow adequate curing time for the adhesive before grouting or exposing the tiles to moisture. 7. **Temperature and Humidity**: Be mindful of the temperature and humidity levels during installation, as extreme conditions can affect the curing process. 8. **Safety Precautions**: Wear appropriate safety gear, such as gloves and masks, to protect against dust and chemicals in the adhesive.

Warm Reminder: In order to prevent various factors from threatening the adhesion of Meihui Juliba 503 tile adhesive, the following suggestions are made for the construction party: 1. It is recommended not to carry out construction when the temperature is below 5°C or in damp conditions;

26

2019

/

11

Grateful for the journey. Thank you all the way. Because of you, I am who I am.

Grateful for the journey. Thank you all the way. Because of you, I am who I am.

28

2019

/

11

Inherit tradition, dedicate to craftsmanship.

Inherit the craftsmanship, with the peach and plum blossoms fragrant, to express gratitude to the teachers.

10

2019

/

09

FUJIAN HUIXING COATINGS TECHNOLOGY DEVELOPMENT CO., LTD


Address: Quanhui Petrochemical Park, Fujian Province

Website: www.fjhuixing.cn

Subscribe to us

Enter your email address to register for new service notifications.

%{tishi_zhanwei}%

Page Copyright © 2024 Fujian Huixing Coating Technology Development Co., Ltd.