Product Series
K11 Tile Adhesive Type I
Classification:
Detailed introduction
Meihui Tile Adhesive Type I is a strong adhesive for tiles, made from adhesive materials, silicate cement, and additives, featuring high strength, a balance of rigidity and flexibility, and no hollowing.
Scope of application:
1. Suitable for bonding small-sized tiles. 2. Can be used for tiling on tiles when combined with tile adhesive companion.
Construction instructions:
1. Construction environment temperature: 5℃-30℃.
2. Mix the powder into clean water to form a paste, using an electric mixer to ensure there are no lumps, and let it sit for about 5 minutes before use.
3. The mixing ratio is 20kg of tile adhesive to about 4.6L of water; the ratio of tile adhesive to water can be adjusted according to the substrate, weather, and construction site.
4. Do not construct in rainy or snowy weather or at low temperatures.
5. The mixed adhesive should be used within 3 hours; do not add water for reuse, and do not mix cured adhesive with water again for construction.
6. After laying the tiles, wait for the adhesive to completely cure for at least 24 hours before proceeding to the next grouting step.
7. When adhering tiles to walls, ensure temporary fixing measures are in place.
8. Usage instructions: 3.5kg-7kg per square meter, depending on the unevenness of the substrate and the tiles.
Recommended construction method using a notched trowel:
1. Use a notched trowel to spread the adhesive evenly on the working surface, forming notches; apply about 1 square meter at a time, depending on the climate and temperature, then press the tiles onto it during the waiting time.
2. The size of the notched trowel should consider the size of the tiles, the flatness of the working surface, and the degree of the tile's back.
3. If the grooves on the back of the tiles are deep or the tiles are large and heavy, apply adhesive on both sides, i.e., spread the tile adhesive on both the working surface and the back of the tiles.
Construction precautions:
1. Ensure the substrate is solid, free of dust, hollow spots, wax stains, release agents, and other loose materials; painted surfaces should be roughened.
2. The bonding surface of the tiles should be clean and free of dust; spray water during construction.
3. Concrete surfaces should be cured for at least 28 days before tiling; newly plastered surfaces should be cured for at least 7 days before tiling.
4. Old concrete and plaster surfaces can be cleaned with industrial detergents and treated, then rinsed thoroughly with high-pressure water.
5. For substrates with high water absorption or in high-temperature, dry environments, spray water to moisten before construction.
6. Store the product in a cool, dry, and ventilated place; this product is non-toxic, harmless, non-flammable, and non-corrosive, and can be transported as ordinary goods. For product standards, production date, batch number, inspector, and shelf life, refer to the certificate of conformity.
Meihui coating has passed the ISo9001 quality management system certification, ISO4001 environmental management system certification, China environmental labeling product certification, product quality are in line with the national standard, and even build a higher than the national standard Meihui standard.
Keyword:
Waterproof
MEIHUI
Online Inquiry
* Note: Please be sure to fill in the information accurately and keep communication open, we will get in touch with you as soon as possible
FUJIAN HUIXING COATINGS TECHNOLOGY DEVELOPMENT CO., LTD
TEL /400-995-8827
Address: Quanhui Petrochemical Park, Fujian Province
Website: www.fjhuixing.cn
Subscribe to us
Enter your email address to register for new service notifications.
Page Copyright © 2024 Fujian Huixing Coating Technology Development Co., Ltd.