Product Series
High-seal waterproof slurry
Classification:
Detailed introduction
Meihui high-closed waterproof slurry is not a traditional rigid waterproof slurry. Its powder is composed of cement, fine sand, and a unique, highly active polymer. The additive is a solution made from carboxylated styrene synthetic rubber, which provides a certain degree of flexibility. It relies not only on surface coating but also has a certain permeability, closing off water channels to achieve waterproofing.
Product advantages:
1. Can be applied in damp areas. Since the slurry must penetrate into the substrate through the action of water, it can be applied in damp areas. If the concrete is dry, it must be moistened with water before application.
2. Strong adhesion to the substrate. The active components in the slurry can penetrate the capillaries and micro-cracks in the cement base and undergo chemical reactions, forming a dense crystalline waterproof layer.
3. Can be used for both positive and negative waterproofing. The crystals formed by this product integrate with the substrate, blocking water from multiple directions, thus effectively waterproofing both positive and negative sides.
4. Tiles can be directly adhered to the waterproof layer.
5. Concrete can still remain breathable. The crystals formed within the capillaries of the concrete will leave relatively fine pores, preventing water from passing through while allowing air and water vapor to flow freely. Therefore, after using this product, the concrete can still undergo normal curing, drying out, and preventing moisture accumulation.
6. Simple construction, cost-effective.
7. Non-toxic, harmless, and environmentally friendly product.
Applicable scope:
1. Indoor and outdoor concrete structures, cement leveling, brick wall structures.
2. Basements, tunnels, mines, building foundations.
3. Floor walls, floors, bathrooms.
4. Cement, swimming pools, sewage treatment pools.
5. Moisture-proofing and seepage prevention for basements, bathrooms, sinks, floors, etc.
6. Especially suitable for waterproof layers under surface tile adhesion.
Construction steps:
1. Prepare tools and clean water.
2. Fully saturate the substrate.
3. Pour component A (liquid) into a bucket.
4. Add component B (powder) into the bucket (A:B=1:4).
5. Mix evenly.
6. Apply the slurry with a brush or roller.
7. Brush onto the saturated substrate.
8. Apply a second coat after 4-8 hours.
Meihui coating has passed the ISo9001 quality management system certification, ISO4001 environmental management system certification, China environmental labeling product certification, product quality are in line with the national standard, and even build a higher than the national standard Meihui standard.
Keyword:
Waterproof
MEIHUI
Online Inquiry
* Note: Please be sure to fill in the information accurately and keep communication open, we will get in touch with you as soon as possible
FUJIAN HUIXING COATINGS TECHNOLOGY DEVELOPMENT CO., LTD
TEL /400-995-8827
Address: Quanhui Petrochemical Park, Fujian Province
Website: www.fjhuixing.cn
Subscribe to us
Enter your email address to register for new service notifications.
Page Copyright © 2024 Fujian Huixing Coating Technology Development Co., Ltd.