Does the air compressor affect the consumption of stone-like paint materials?
Release time:
2022-04-25
Source:
The flatness of red brick walls is poor, making direct installation of aluminum strips impossible.
Construction method for aluminum strips on red bricks:
1) After marking the grid, perform overall wall reinforcement at the marked positions;
2) Install aluminum strips at the reinforcement positions;
3) Note to perform surface treatment before installing aluminum strips;
4) It is recommended to use crack-resistant mortar for the adhesive material of aluminum strips.
Q2: Does the air compressor affect the consumption of stone-like paint?
The size of the air pump does not affect material consumption, but it significantly impacts construction efficiency.
1) First, we need to understand the factors affecting material consumption: spraying technique and spray pressure control;
2) Secondly, we need to understand the spraying method for the intermediate coat:
a. Increased coating rate: The first intermediate coat is sprayed with increased air pressure, and the second intermediate coat is sprayed with normal air pressure.
b. Enhanced texture: The first intermediate coat is sprayed with normal air pressure, and the second coat has reduced air pressure.
3) Regardless of the spraying method, both coats must be fully sprayed to achieve the desired spraying effect;
4) Control the uniformity of spraying to avoid excessive thickness of the paint film in local areas, especially in component parts and the inner sides of aluminum alloy grooves.
Q3: The adhesive method for the groove lines of stone-like paint.
Groove lines are currently the most commonly used groove technique in the industry. The adhesive materials used for installing groove lines on walls include nail-free glue and crack-resistant mortar.
1) Due to the convenience and speed of nail-free glue installation, it is the most commonly used adhesive material in the industry. However, nail-free glue is not suitable for all wall surfaces.
a. When the wall surface has poor flatness, nail-free glue often cannot achieve the desired perfect effect. The wall may bulge, leading to height differences;
b. When the wall surface is relatively flat, we can paste along the wall, resulting in a very good effect.
2) When the wall surface has poor flatness, we can use crack-resistant mortar for adhesion. The adhesive methods include:
a. Overall marking and partitioning of the wall;
b. Based on the marked lines, a reference line needs to be pulled;
c. Install aluminum alloy along that line;
d. Note: During installation, there may often be insufficient horizontal or vertical alignment. After installation, we need to make adjustments to avoid poor joint alignment.
e. Before construction, we need to apply a bonding agent to prevent insufficient bonding force between aluminum alloy, PVC, and crack-resistant mortar, achieving the effect of preventing cracking.
Meihui Stone Feel Paint, Construction Techniques
FUJIAN HUIXING COATINGS TECHNOLOGY DEVELOPMENT CO., LTD
TEL /400-995-8827
Address: Quanhui Petrochemical Park, Fujian Province
Website: www.fjhuixing.cn
Subscribe to us
Enter your email address to register for new service notifications.
Page Copyright © 2024 Fujian Huixing Coating Technology Development Co., Ltd.