Gold putty special primer
Under the foundation, Meihui Putty Special Primer-----Select the inner wall primer synthesized by high-quality acrylic emulsion, which can effectively seal the base water, and has excellent performance in adhesion, hiding power, acid and alkali resistance and water resistance. The coating lays a good foundation.
Roll coating, brush coating, airless spraying
Before painting, make sure the wall is clean, strong, free of dirt, powder or empty, loose. The new base layer of putty wall should be dried to a pH below 10, the moisture content is less than 10%, and then brushed.
Theoretical paint consumption:
The painting area per liter is about 13 square meters per layer, and each lane should be completely dry before being painted.
1. The batch must be dried for more than two days (low temperature should be extended), and it can be used after being smoothed with 800 mesh sandpaper.
2. The primer for the putty special primer is applied. After two hours of coating (25 ° C, 50% relative temperature), the top coat is applied. The temperature is not lower than 5 ° C, and the humidity is 85% or more.
3. The special primer for putty can be diluted with no more than 20% of water (brushing).
4. Please read the relevant product manual carefully before use to obtain a reliable and satisfactory coating effect.
5. Do not place this paint in a place where children can easily touch it to prevent them from accidentally eating food. If the paint accidentally splashes into the eyes, please wash it with clean water and send it to the hospital for medical treatment.
Storage and transportation:
This product is non-toxic, non-flammable, non-corrosive, and can be transported as ordinary goods. This product is stored in a cool and dry place, protected from rain and moisture; the product's implementation standards, batch number, date of manufacture, inspector, and shelf life are listed.
Sweep, there is a surprise